|
|
|
|
|
Go To | 969 HQ Laser Imaging |
969 HQ Dual Printer |
Product Data
System Features3M™ Automatic Image Quality Control from Imation™ The Imation™ Automatic Image Quality Control System consistently provides you with high-quality images. The system's built-in densitometer reads each film and sends image density data to the laser imager, which automatically adjusts the beam intensity to ensure images are printed according to your preset preferences. This process frees your diagnostic staff from the time-consuming task of monitoring and adjusting printing procedures. IR Laser Imaging Film and Instant Daylight Load Film Cartridges 3M™ HQB and HQC Laser Imaging Films from Imation™ are designed specifically for the 3M™ 969 HQ Laser Imager Systems by Imation™ and provide unsurpassed dynamic range, maximum density, image tone and graphic quality. The films are packaged in 3M™ Instant Daylight Load Film Cartridges from Imation™ to make film loading a one-step procedure. Plus, a bar code gives the laser imager information about film size and type, and allows it to track remaining film quantity. Imation Instant Daylight Load Film Cartridges eliminate the need for darkroom operations. System Expandability Your Imation service representative can expand your Imation™ 969 HQ Dual Printer into a full featured 969 HQ Laser Imager with a field installable upgrade kit. Flexible Formatting The 969 HQ Dual Printer offers the capability of 1:1, 2:1, 4:1, 6:1, 9:1, 12:1, 15:1, 16:1, 20:1, 35mm slides and up to four custom formats. The imager also supports the use of 8" x 10", 11" x 14" or 14" x 17" film sizes. Improved Optics The 969 HQ Dual Printer features a solid-state high-performance laser diode and improved optics for greater efficiency and higher image quality. Imation warrants the laser diode against defects for the life of the laser imager (under normal use and when used only with Imation Laser Imaging Film). Advanced Film Transport System The 969 HQ Dual Printer's horizontal film transport system provides your imaging department with exceptional reliability. A simplified film path drastically reduces the likelihood of jams and other interruptions for maximum uptime and continuous productivity. Image Adjustment You can select any two of 16 smoothing functions, including replicate and cubic spline variations, to adjust images for optimal quality. Magnetic Field Performance The 969 HQ Dual Printer can operate in a magnetic field of up to 100 Gauss while maintaining high image quality. An easy-to-use control panel simplifies all operating procedures. Specifications Dimensions Dimensions with doors closed (without processor):
Height: 1280mm (50.4 in.) Dimensions with doors open (without processor):
Height: 1280mm (50.4 in.) The 969 HQ Dual Printer has wheels that allow it to be rolled into position.
Weight: 590 lbs. without processor Electrical The 969 HQ Dual Printer is adaptable to these voltage and frequency combinations:
U.S.: 115 VAC ± 10%, 60 Hz A 15 amp dedicated line and outlet is recommended for the imager. Note: The dedicated XP535 Processor requires a separate 200, 220 or 240 VAC, 20 amp, dedicated line and outlet. Power consumption: 260 VA (max), Imager only; 3260 VA (max), XP535 Processor only Remote control interface: RS232 or RS422 Operating Environment Temperature: 15° to 30°C (59° to 86°F) Humidity: 20% to 75% RH Vibration: 0.01 Gs (max) Magnetic field: 100 Gauss (max), Imager only; 30 Gauss (max), with XP535 Processor
Storage environment: Environmental Effects
Heat load: 317 BTU/hr. (max), Imager only;
Floor load: Less than 100 lb./sq. ft.
Acoustical noise: 60 db normal operation, 70 db transient noises
For more Information: Contact your local Imation sales representative, call Imation at 1-888-466-3456, ext.4-6000, or call our Customer Resource Center directly at 1-800-328-2910. Imation Laser Imager System equipment: Imation warrants the Imation Laser Imager System equipment will be free from defects in parts, material and manufacture for a period of one (1) year from date of shipment to Buyer. For defects occurring during the warranty period, and about which Imation has received notice during the warranty period, Imation will provide Buyer with free replacement parts to replace warranty-covered items. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESS AND IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS, AND THOSE ARISING FROM A COURSE OF DEALING OR USAGE OF TRADE. The express warranty does not apply to the following: expendable parts; defects or damage incurred in transportation to the end user; defects or damage due to accidents, neglect, misuse, operator error, improper installation or alteration of Imation Laser Imager System equipment; or operation of Imation Laser Imager System equipment out of specification. Except for the exclusive remedy stated above, Imation is not liable for direct damages. Imation will not in any event be liable for indirect, incidental or consequential damages, regardless of the legal theory asserted, including negligence and strict liability.
Copyright 1996 Imation. All rights reserved. 
|